How to replace blade on retractable utility knife?

If your utility knife has a dull blade, it’s time to replace it. Fortunately, this is a easy process that only takes a few minutes. Here’s how to replace the blade on a retractable utility knife:

1. Open the blade cover.

2. Remove the old blade.

3. Insert the new blade.

4. Close the blade cover.

How do you change the blade on a retractable utility knife?

All it is is just a phillips head screw on it you want to go and unscrew this screw here all right. This will allow you to take the door off and then you can unscrew the other screws that are holding the panel on.

In order to sharpen a knife, you have to slide the blade forward physically. Pull the blade out and turn it around so the sharp edge is facing the whetstone. Push the blade back in and repeat the process a few times.

How do you put a new blade in a utility knife

The release lever on the blade carrier Until it disengages with a knife and carefully Slide the knife out of the blade carrier. To reassemble, insert the knife into the blade carrier and make sure the blade is properly seated in the blade carrier. engage the release lever to lock the knife in place.

Out to put the blade in again we line up the bottom With the bottom slide of the blade holder and push up.

How do you snap off a retractable blade?

It is important to grasp the blade edge firmly when breaking it off. This will make it easier and safer to snap the blade edge off. Once you have a firm grip on the blade edge with a pair of pliers, you can break it by applying downward force.

The quick release button is a little white button that can be found on the knife. To use it, simply run over the knife with your finger and gently insert the blade into the quick release button. This will release the blade from the knife so that you can safely remove it.

How do you load a Stanley retractable utility knife?

There’s a button on the back handle of the knife All You need to do is push that button pull the blade out It’s that simple

That’s pretty interesting. In order to replace blades, you actually have to have it retracted, then push the button to release the old blade. It’s a bit of a hassle, but worth it in the end.

How do you open anvil retractable utility knife

To open the knife, you have to push the plastic button near the tip and simultaneously pull out the blade (or push in the blade).

Assuming you are talking about a knife sharpener:

First, make sure both blades are snapped into place. Next, plug the sharpener in and push the button. And that’s it – your knife will be nice and sharp!

How do you put a blade in a Dewalt utility knife?

When changing the blade on a retractable blade model, ensure that the slider is all the way forward. To remove the old blade, push and hold the blade release button while pulling the old blade out. To insert the new blade, keep the slider forward and push and hold the blade release button while inserting the new blade. Release the button, and ensure that the blade is locked into the slider.

Most utility knife blades are, in fact, universal. Certain shapes might not look the same, such as a hook-style blade, but they still fit standard utility knives. This is convenient because it means that you don’t have to buy a new blade every time you want to change the style of your blade.

How do you change the blade on a Dewalt folding retractable knife

For the standard model plate storage can be accessed by pushing on the button in the bottom of the door. The button will release the door and allow it to be pulled out. The plate storage is located in the bottom of the door. It is recommended that the plate storage be emptied before each load to ensure that the clothes are not accidentally caught on the plate.

With the bolt on threaded, you can remove the old blade and install the new cutting blade by aligning it with the bolt. Make sure the cutting edge is facing the correct direction and tightens the bolt securely.

How does a retractable utility knife work?

Only after the blade advance button is released or retracted, the blade of this auto-retracting safety box cutter will retract. The blade is made of high-quality carbon steel and is extremely sharp. It is ideal for opening boxes and cutting through tape and packing material.

If you’re looking to get the most out of your Get, be sure to follow the instructions that come with it. Among other things, you’ll learn how to properly insert the blade and slide it to the bottom for optimal results.


To replace the blade on a retractable utility knife, first remove the old blade by unscrewing the blade housing and pulling out the blade. Next, insert the new blade into the housing and screw the housing back on.

The process of replacing a blade on a retractable utility knife is actually quite simple. With just a few basic tools, you can have the job done in no time. Whether you’re a first-time user or a seasoned pro, these steps will help you get the job done quickly and easily.

Joe owns a small tool workshop in Utah. He inherited passion for construction from his father and aims to help others writing educational articles in his spare time. Every man should know how to fix basic things around the house!

Leave a Comment