How to reassemble stanley 10-499 utility knife?

To reassemble your Stanley 10-499 utility knife, follow these steps:

1. Insert the blade into the knife body, making sure that the serrated edge is facing up.

2. Screw the blade into place.

3. Replace the handle, making sure that the metal tab is facing up.

4. Screw the handle into place.

5. That’s it! Your Stanley 10-499 utility knife is now ready to use.

1. Unscrew the blade holder from the back of the knife.

2. Remove the blade from the holder.

3. Clean the holder and blade.

4. Place the blade back into the holder.

5. Screw the holder back onto the knife.

How do you open a Stanley knife package?

To open the blade compartments, start by hitting the red button at the back. Then, open up the compartments where the blades are located. Be careful when handling the blades, as they are very sharp.

There’s a button on the back handle of the knife. All You need to do is push that button, pull the blade out, and then release the button to lock the blade in place.

How do you put the blade in a Stanley carpet knife

This knife wrap is a great way to add a little bit of personality to your knife collection! It’s easy to install and really makes your knives stand out.

You have to slide it forward physically Pull the blade out turn it around push It back in a very natural way

How do you open a fixed blade utility knife?

For the standard model, plate storage can be accessed by pushing on the button in the bottom of the door. The button will release the latch and allow the door to be opened.

It is an offence to carry any sharp or bladed instrument in a public place, with the exception of a folding pocket knife where the cutting edge of the blade is 762 cm (3 inches) or less.

How do you put an electric knife together?

Yourself make sure both blades are snapped into place plug it in push the button And your knife can begin operating. It is important to keep the base of the knife clean and dry at all times to prevent rusting.

There is no information provided in the prompt.

How does a retractable utility knife work

Only after the blade advance button is released or retracted can the blade of this auto retracting knife be retracted.

The mechanism is simple. First, pop the top of our housing. Next, we’ll put our metal tab on top there with a hole in it. Finally, we’ll screw in our top screw to secure it all in place.

How do you put a blade in a carpet cutter?

If you need to stop your train for any reason, always put the guard down. This will help to keep the train stationary and prevent it from rolling away. You can then rest it inside the rails to keep it from moving.

Polishing your knife is an important step in keeping it in good condition. Using a metal cleaning solution, add hot water to create a mixture with a ratio of 1:20. Add the polishing fluid and mix for at least five minutes. Next, roll the blade through the mixture before washing it clean. Finally, dry the blade and apply Fabulustre and Zam for a smooth appearance.

How do you snap off a retractable blade

When breaking off a blade edge, it is important to firmly grasp the blade edge as close to the separation line as possible. This will make it easier and safer to snap off the blade edge. Once you have a firm grip on the blade edge with a pair of pliers, you can break it off by applying downward force.

To put a new blade under the utility knife, first retract the blade. Turn the knife over and grasp the blade from the underside. Place your fingers underneath the blade, and then push it up until it clicks into place.

How do you change the blade on a Trojan Stanley knife?

That’s not necessary on this model there’s a small black plastic Button you actually hold that in

To remove the blade from the safety razor, you have to push the plastic button near the tip and simultaneously pull out the blade (or push in the blade).


1. Begin by taking the blade out of the knife.

2. Unscrew the bolt that holds the blade in place.

3. Set the blade aside.

4. Take the handle off of the knife.

5. Unscrew the two screws that hold the handle in place.

6. Set the handle aside.

7. Take the plastic piece out of the knife.

8. Unscrew the screw that holds the plastic piece in place.

9. Set the plastic piece aside.

10. Assemble the knife in the reverse order.

11. Screw the bolt back into place.

12. screw the two screws back into place.

The Stanley 10-499 Utility Knife is a great tool for any household. It is easy to use and easy to store.

Joe owns a small tool workshop in Utah. He inherited passion for construction from his father and aims to help others writing educational articles in his spare time. Every man should know how to fix basic things around the house!

Leave a Comment