How to take battery out of iphone 4 without screwdriver?

Taking the battery out of your iPhone 4 may seem like a daunting task, but it can be done relatively easily without the use of a screwdriver. First, locate the small opening at the bottom of the iPhone 4 near the charging port. Using a paperclip or a similar object, insert it into the opening and slightly pry open the case. Once the case is open, locate the battery which will be adhered to the back panel. There may be a protective plastic cover over the battery which can be peeled off. Using your fingers or a flat object, lightly pry the battery out of the adhesive and lift it out of the phone.

There is a small notch on the bottom edge of the iPhone 4’s back panel. Insert a thumbnail or a small, flat-head screwdriver into the notch and pry the back panel up and off of the phone. The battery is located just beneath the back panel.

How do you take the battery out of an iPhone 4?

So, I put my old battery aside and put my new battery in. And before I reassemble the phone, I’m going to make sure the new battery is working properly.

And any knife with a sharp tip should work with for this so you could use like a stanley knife or a box cutter.

What screwdriver do I need to open iPhone 4s

Pentalobe screws are used in the iPhone 4S (not the iPhone 4). You can check the bottom of your iPhone to see if you have pentalobe or Phillips #000 screws.

Pentalobe screws are used in a variety of electronic devices, including the iPhone and MacBook. The three most common sizes are TS1 (08 mm), TS4 (12 mm), and TS5 (15 mm). Each size has a different use, depending on the device.

Is the iPhone 4 battery removable?

If your iPhone 4’s battery is swollen, take appropriate precautions. For optimal performance, after completing this guide, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least two more hours.

If you need to remove the rear panel from your iPhone, you can do so by pinching it with your fingers and lifting it away. Alternatively, you can use a small suction cup to help with the removal. Just be careful not to damage the plastic clips attached to the rear panel.

How do you open a battery without a screwdriver?

If you don’t have anything that can fit in the grooves on the screw, grip the top of the screw with a pair of needle nose pliers and twist.

If you need to remove a small screw, there are a few different tools you can use. The tip of a knife can be inserted into the head of the screw and turned counter-clockwise. A metal nail file can also be used in the same way. Small scissors or tweezers can also be used to remove the screw.

What kind of screwdriver opens an iPhone

This precision P2 pentalobe screwdriver is perfect for opening iPhone and Apple devices. The P2 driver is compatible with the 5-point star shaped pentalobe 5IPR security fasteners used on the bottom of iPhones. The driver is also compatible with the security screws on the bottom of all models of iPhone since the iPhone 4.

With these screws removed, we can gently press up and remove the back cover to install the back panel. Be careful not to damage any of the exposed components while doing this.

How do I open my iPhone 4 SIM card slot?

If you need to eject the SIM tray on your iPhone, you can do so by inserting a paper clip or SIM-eject tool into the hole beside the tray. Push in towards your iPhone, but don’t force it. If you’re having difficulty ejecting the SIM tray, take your device to your carrier or an Apple Store for help.

If you forgot your iPhone passcode, you can follow the steps below to restore your device:

1. Make sure that you have a computer (Mac or PC)

2. Turn off your iPhone

3. Put your iPhone in recovery mode

4. Restore your iPhone

What size is a T4 screwdriver

The above screws are all part of the Internal Socket Head Type TORX family. The sizes listed are the maximums that these screws can accommodate.

You can unlock your device using Touch ID without pressing the Touch ID sensor by going to Settings > Accessibility > Home Button [or top button] and turning on Rest Finger to Open.

What is a T4 screwdriver?

The iFixit T4 Torx screwdriver is a precision driver made in Germany with uncompromising quality. It features a knurled grip and rubberized, ergonomic handle with swivel top for easy use. This is the last driver you’ll ever need to buy!

iPhone 4 prices have dropped significantly since they were first released in 2010. You can now find them for as low as $23 on some websites. However, the average price is still around $34 as of February 2023. Apple phones typically hold their value well, but prices will continue to drop as new models are released. If you’re looking for the best price, buying a used iPhone 4 is your best bet.

Final Words

There is a small tab at the bottom of the battery compartment. Use a paperclip or SIM eject tool to press and hold the tab, then slide the battery out.

Taking out the battery of an iPhone 4 without a screwdriver is a simple process. First, locate the small notch on the bottom edge of the phone near the center. Insert a small, flat-head screwdriver or a pry tool into the notch and lightly pry the bottom edge of the phone away from the rest of the casing. The battery is now exposed. To remove it, simply pull on the small tab attached to the negative end of the battery and lift it out.

Joe owns a small tool workshop in Utah. He inherited passion for construction from his father and aims to help others writing educational articles in his spare time. Every man should know how to fix basic things around the house!

Leave a Comment