If you’re anything like me, you hate having to fumble around for a screwdriver every time you need to open up your Joy-Con. Thankfully, there’s a hack that allows you to open them without a screwdriver! Here’s what you need to do:
1. Open up your Nintendo Switch console and unscrew the four small screws on the back using a small Phillips head screwdriver.
2. Carefully pull off the back panel of the Switch.
3. Locate the battery pack on the Joy-Con and carefully disconnect it.
4. Use a small, flat head screwdriver to gently pry open the plastic housing around the Joy-Con’s buttons.
5. Gently pull the electronic guts of the Joy-Con out of the plastic housing.
6. Use a small Phillips head screwdriver to unscrew the four screws holding the Joy-Con’s buttons in place.
7. Carefully remove the buttons from the Joy-Con.
8. Use a small, flat head screwdriver to gently pry open the plastic housing around the Joy-Con’s control sticks.
9. Gently pull the control sticks out of the Joy-Con.
10. Use a small Phillips head screwdriver to unscrew the four screws holding the Joy-Con’s control sticks in place.
11. Carefully remove the control sticks from the Joy-Con.
12. Reassemble the Joy-Con in the
What can I use to unscrew my Joycons?
If you need to open up your Nintendo Switch Joy-Con controllers, you’ll need a precision screwdriver like this one. It has a special “tri-wing” tip that is specifically designed for the screws on the Joy-Cons.
To remove a small screw, you can use the tip of a knife, a metal nail file, small scissors, or tweezers. Insert the tip of the tool into the head of the screw and turn counter-clockwise.
How do you remove a Joy-Con switch screw
Every time you move around non-stop, you’re going to damage this part of the more.
When you want to detach the Joy-Con controllers from the console, be sure to press the release button at the back of the Joy-Con and then slide the Joy-Con up from the bottom. It’s important to attach the Joy-Con straps before starting a game or software, otherwise you may damage the console or controllers.
What size screwdriver for Joy-Con?
This screwdriver is perfect for opening up your Nintendo Switch Joy-Con controllers, as well as the Switch itself. It comes with both Phillips and Y00 heads, so you’ll be able to handle any type of screw you come across. Additionally, the precision tips and special tri-wing design make it ideal for delicate work, such as battery replacement.
This is a great screwdriver tool for working with metal triwing screws. It has a strong build quality and a comfortable grip. The tips are precision ground for a perfect fit.
How do you force a screw to unscrew?
If you’re having trouble getting a screw out, rust may be to blame. To loosen a rusty screw, start by spraying it with rust penetrant. Let the penetrant work for at least 15 minutes, then spray it again and tap the screw head with a hammer. Try the screwdriver again. With any luck, the rust will have loosened the screw enough for you to remove it.
If you’re having trouble removing a screw, try adding a dab of superglue to the top of the screw. Set your driver into the screw head, and allow the glue to dry. Using a firm grip and downward pressure, give the driver a twist to remove the screw. Don’t forget to clean the remains of the glue from the tip of your driver.
How do you make a homemade screwdriver
This is a great way to remove a stripped screw. The heat from the fork will soften the plastic and allow you to get a good grip on the screw.
Tri-point screws are used to fasten together the Joy-Con case. Use four screws to ensure the case is securely fastened.
How do you unscrew a 3 prong screw?
If you have a device with three wing or three-pronged screws and you don’t have a matching screwdriver, you can try using a small torx or hex screwdriver. For example, if you have three wing screws with a 5 mm head, use a TX 5 screwdriver. The point is that the screwdriver should only cover the center of the screw.
If you need to detach the Joy-Con straps from the Joy-Con controllers, first ensure that the slide lock at the bottom of the strap is in the unlock position. You don’t need to press the release button on the back of the controller, just slide the strap from bottom to top.
Do Nintendo repair Joycons for free
Just wanted to let you know that you can send your Joy-Cons to Nintendo for free repairs if you think they’re suffering from “drift” or any other problems. You just need to fill out a form to submit a repair. Nintendo does free Joy-Con repairs in most countries.
The report suggests that the wear is caused by the plastic circuit boards rubbing against each other when the Joy-Con is moved, and that over time this can lead to a loss of connectivity between the joystick and the circuit board. This issue, which has been affectionately dubbed “Joy-Con drift” by the community, has been a thorn in Nintendo’s side for some time now.
While Nintendo has offered free repairs for Joy-Con drift in the past, the Which report claims that the problem is only getting worse with time. The report also notes that Nintendo’s current repair policy doesn’t cover Joy-Con drift that occurs after the standard 12-month warranty period.
This is a major problem for Nintendo, as the Joy-Con are an essential part of the Switch experience. Joy-Con drift can not only be annoying, but it can also make games unplayable. Hopefully Nintendo will be able to find a resolution to this issue soon.
How do you open Joy-Con and fix drift?
If your Joy-Cons are having issues with their button mapping, try resetting the button maps. To do this, connect your Joy-Cons to the Switch, open System Settings, then head to the Controllers and Sensors menu. Select Change Button Mapping at the top of the menu, then select Reset for each Joy-Con.
The Switch Lite uses JIS screws. If you don’t have a JIS screwdriver, you can use a Phillips screwdriver, but it may damage the screws.
What size is PH1 screwdriver
The 10 inch (#1) cross head screwdriver has a 10 inch (250mm) round shaft. The screwdriver is used to drive screws with a Phillips head.
The pentalobe screw is a five-pointed, flower-shaped screw that is famous for being used by Apple as a security measure. Mechanically, the pentalobe screw is not as strong as other types of screws and is more likely to strip out.
Warp Up
You cannot open a Joycon without a screwdriver.
If you want to open your joycon without a screwdriver, you can use a toothpick or a paperclip. Just be careful not to damage the joycon in the process.
