How to open craftsman retractable utility knife?

A utility knife is a versatile tool that can be used for a variety of tasks, from opening packages to cutting through rope and fabric. The Craftsman retractable utility knife is a durable and easy-to-use knife that is perfect for any home or office. To open the knife, simply push the release button on the handle and the blade will extend from the body. To close the knife, push the release button again and the blade will retract into the body.

To open a Craftsman retractable utility knife, squeeze the black button on the top of the knife while simultaneously pulling the blade out of the handle.

How do you change the blade on a Craftsman retractable utility knife?

We are lining up the bottom of the blade with the bottom slide of the blade holder. We are holding the blade in place with our fingers and thumbs. We are putting the blade in the holder at a 45 degree angle. We are pushing the blade into the holder until it clicks into place.

I’m going to drop this right here in those two little tooth marks. It’s a perfect fit!

How do you open a utility blade dispenser

To change the blade on a Get, first push in the bottom to slide the blade out. Then follow the instructions that come with the new blade to insert it. To make sure it’s inserted correctly, push in the bottom again and slide the blade back in.

To replace the blade in your knife, you have to push the plastic button near the tip and simultaneously pull out the blade (or push in the blade).

How does a retractable utility knife work?

Only after the blade advance button is released or retracted, will the blade of this auto-retracting knife return to its sheath. If the button is not released, or if the button is only partially released, the blade will remain extended.

With the bolt removed, I can now remove the blade support and the blade itself. Now I can reinstall the blade support and the blade, making sure the bolt is tightened securely.

How do you remove a blade from a utility knife?

The release lever on the blade carrier must be in the UP position before removing the blade. To do this, insert a small, flat-bladed tool, such as a putty knife, between the blade and the blade carrier. Gently push up on the release lever until it disengages with the knife. Then, slide the blade out of the blade carrier.

A sharp knife is always better than a dull knife. If you need to use the other end of the blade, simply reverse it and re-insert it into the knife. Use your thumb to press the lever up, making sure it’s secure.

How do you snap the blade off a utility knife

If you need to snap off the blade edge, it is safest and easiest to do so by grasping it from the point closest to the separation line. Use a plier to firmly grasp the blade edge, then apply a downward force to break it.


To remove the mechanism from the utility knife, simply pop off the top and it will come out. Have a great day!

How do you open a blade?

There are two common ways to open a folding knife: the thumb stud and thumb hole methods. To open a knife using the thumb stud method, simply apply pressure to the stud with your thumb and the blade will open. To open a knife using the thumb hole method, place your thumb in the thumb hole and apply pressure to open the blade.

In order to avoid getting your fingers caught in the door, simply push down on the door with your hand right here. Just make sure to push down firmly to avoid any accidents.

How do pocket knives open

You stick your nail in there And you pull it open tada So pretty simple pretty easy however it can be really dangerous because you’re basically puncturing your skin and you could get an infection if you don’t do it correctly so just be really careful when you’re doing it

knives with locking blades are considered safer than those without locking mechanisms, since the blade is less likely to accidentally close on the user’s hand. For young or new knife owners, a locking blade knife may be a good option to help prevent accidental cuts.

How do you open a XW knife?

The lock-back design is a safety feature that prevents the blade from folding back into the handle while in use. The quick-change mechanism allows for easy removal and insertion of new blades without having to disassemble the entire knife.

The button lock is a type of lock that is common on automatic knives. A cutout in the blade tang engages with a spring-loaded button to hold the knife open. To release, push the button down and swing the blade closed.

Final Words

To open a Craftsman retractable utility knife, first depress the button on the side of the knife. This will release the blade. Next, slide the blade out of the casing until it locks into place. To close the knife, depress the button on the side of the knife again and slide the blade back into the casing.

If you’re in need of a utility knife that can handle a variety of tasks, the Craftsman retractable utility knife is a great option. It’s easy to open and use, and can be a handy tool to have on hand for a variety of situations.

Joe owns a small tool workshop in Utah. He inherited passion for construction from his father and aims to help others writing educational articles in his spare time. Every man should know how to fix basic things around the house!

Leave a Comment