How to open craftsman folding utility knife?

If you need to open a Craftsman folding utility knife, there is a simple process that you can follow. First, locate the thumb stud on the blade. This is the small piece of metal that protrudes from the blade and is used to open the knife. Next, place your thumb on the stud and apply pressure to open the blade. Once the blade is open, you can begin using the knife for its intended purpose.

To open the knife, you will need to first locate the tab on the side of the knife. Once you have found the tab, simply push it in the direction of the blade and the knife will open.

How do you remove the blade from a craftsman folding utility knife?

The black push button is now out so if i press on this I can get the blade Out to put the blade in.

If you need to change the blade in your Craftsman 9-9486 utility knife, simply remove the screw and then the top half of the knife. This will give you access to the blade, which you can then replace as needed.

How do I open the utility blade

Make sure the button is pushed all the way in before you start cutting. This will ensure that the blade is locked in place and won’t come loose while you’re cutting.

For the standard model plate storage can be accessed by pushing on the button in the bottom of the door. The button will release the mechanism and allow the door to be opened.

How do you remove a craftsman blade?

When removing a cutting blade from the blade spindle, it is important to take care not to cut your hands. If the blade is stubborn or stuck, you can use a ball peen hammer to tap the top of the blade slightly and drive it from the blade spindle.

The release lever on the blade carrier Until it disengages with a knife and carefully Slide the knife out of the blade carrier. Wash the knife, the blade carrier, and the release lever with soapy water. Rinse and dry all the parts.

How do I change the blade on my Craftsman Sears?

To change the blade on your bandsaw, start by opening the blade cover in the upper cabinet. Then, pull the blade out of the bandsaw. Next, position the new blade on the bandsaw, making sure that the teeth are pointing in the correct direction. Finally, close the blade cover and tighten the screws to secure the new blade in place.

The red button on the blade guard is the release button. Pushing it will allow you to remove the blade guard assembly. Once the blade guard is removed, you can insert a slot screwdriver into the blade release lever to release the blade.

How do you change a utility blade

A sharp knife is definitely better than a dull one! I always make sure to push the little tab on the top of the blade to release it before I use it. If I’m reversing the blade to use the other end, I just re-insert it into the end of the knife. Always use your thumb to press the lever up to make sure it’s secure.

To insert the blade into the device, depress the black button and push the blade in. Keep the button depressed the entire time.

How do you open anvil retractable utility knife?

To change the blade on your knife, you have to push the plastic button near the tip and simultaneously pull out the blade (or push in the blade).

To replace the blade in your razor, first hold the handle in your dominant hand and use the other hand to hold the head of the razor. Then, rotate the handle to the left until the head begins to the separate from the handle or the top of the head opens up to reveal the blade, depending on the razor. Once the blade is exposed, carefully remove it from the razor and dispose of it properly. Then, insert a new blade into the razor, making sure that it is aligned properly. Finally, rotate the handle to the right to lock the new blade in place.

How does a retractable utility knife work

The button on this auto-retracting knife only activates the blade when it is released or retracted. This safety feature prevents the blade from accidentally deploying while the knife is not in use.

An auto-retracting utility knife is a great tool for safety managers. The user must keep a thumb or finger on a slider in order to keep the blade exposed. As soon as the slider is released, the blade retracts through an automatic spring mechanism. This feature helps to prevent accidents when the knife is not in use.

How do you use a snap off utility knife?

If you need to snap off the blade of a knife, it is safest to do so by grasping the blade at the point closest to the separation line. This will give you the most leverage to break the blade. Once you have a firm grip on the blade with a pair of pliers, apply downward force to snap it off.

With the bolt on threaded you can remove the old blade install the new cutting blade by aligning it with the motor shaft. hand tighten only. be sure not to over tighten or you could damage the motor shaft.


To open the knife, start by holding the knife in your dominant hand. Then, use your other hand to grip the blade near the base and pull the blade outwards. Next, use your thumb to push the release button on the side of the knife handle. This will cause the blade to snap into place. Finally, to close the knife, grip the blade near the base and push it back into the handle until it clicks into place.

There are many ways to open a craftsman folding utility knife. The most common way is to use a thumb stud or a flipper. Some people also use a belt clip or a lanyard hole.

Joe owns a small tool workshop in Utah. He inherited passion for construction from his father and aims to help others writing educational articles in his spare time. Every man should know how to fix basic things around the house!

Leave a Comment