Assuming you mean how to open the case:
Apple uses pentalobe screws to secure the back plate of the iPhone 6. You will need a pentalobe (5-point) screwdriver to remove these screws and open the case.
There is no official way to do this, asdisassembling the iPhone 6 requires special tools. However, some peoplehave had success using a paperclip or a SIM card eject tool to open thecase. Insert the tool into the hole next to the headphone jack and pushfirmly. The case should pop open. Be careful not to damage the internalsby touching them with the tool.
How do you open an iPhone screw without a screwdriver?
And any knife with a sharp tip should work with for this so you could use like a stanley knife or a box cutter.
This precision P2 pentalobe screwdriver can be used to open up iPhone and Apple devices. The P2 driver is specifically designed to be compatible with the 5-point star shaped pentalobe 5IPR security fasteners used on the bottom of iPhones. This means that the driver can be used on the security screws on the bottom of all models of iPhone since the iPhone 4.
How to open up an iPhone 6
Now thankfully cracking open the 6 is actually easier than opening previous iPhones. Now you still have to use a case opener or a spudger to get in there, but it’s not as hard as it used to be. So, if you’re looking to repair your iPhone 6, or just want to see what’s inside, here’s a tutorial on how to do just that.
To move something gently to the side, using your hands to push it down so it’s lying flat. Be careful not to damage or break the item.
What can I use instead of a small screwdriver?
There are a few things that you can do in order to remove a small screw. You can use the tip of a knife and insert it into the head of the screw. Another option is to use a metal nail file and place the tip of it into the head of the screw, turning it counter-clockwise. You could also use small scissors or tweezers.
If you don’t have any kind of screwdriver, use a lighter to soften the plastic at the handle end of the screwdriver. Then, use a sharp knife to cut through the softened plastic.
What tools do I need to open an iPhone 6?
P2 Pentalobe screwdriver – This screwdriver is used for most iPhone repairs and teardowns. Insert the tip of the screwdriver into the recessed area at the bottom of the iPhone.Apply pressure to the handle to remove the battery door.
Phillips #000 screwdriver (iPhone 6 only) – Make sure this one has a + shaped head and not a flathead. Insert the tip of the screwdriver into the hole in the bottom of the iPhone. Apply pressure to the handle to remove the battery door.
So just slide in And then give it a little bit of turn just a tiny bit you turn too much you will see the needle go all the way to the end and you don’t want that so just a tiny little bit and that’s it now you can put your foot on the pedal and start sewing
What size screwdriver for iPhone
This is the type of screwdriver you need for the 08 mm P2 Pentalobe screws on the bottom of the iPhone. The Phillips #000 15mm bit is for the Phillips screw.
If your device is frozen and cannot be powered off normally, you can try a force restart. To do this, press and hold the volume up button, then press and release the power button.
How do I unlock my iPhone without opening it?
You can unlock an iPhone without a passcode by doing the following: opening the Control Center and turning off Wi-Fi, Bluetooth and cellular data; opening the calculator; turning the phone sideways to open the scientific calculator; typing a period; tapping In; and then swiping up. The iPhone is then unlocked.
If you have finished paying for your contract or purchased your iPhone outright, you are legally allowed to unlock it. However, if you are still in the process of paying for your contract, you do not fully own the iPhone yet, so it is best to check with your carrier before unlocking it.
What is the easiest way to take off an iPhone 6 case
Using your thumb as leverage, carefully push down on your fingers to create a ‘thumbs up’ gesture.
When the time comes to replace your iPhone 6 battery, you can do it yourself in just a few minutes. There is no need to take it to a professional or to a store. Simply remove the old battery and install a new one. It is really that simple.
How do you take the battery out of an iPhone 6 without damaging it?
If you need to remove the battery from your phone, you can heat the back side of the phone with a hair dryer to soften the adhesive. The battery will come out easier this way. To avoid damaging the battery, lever the battery’s left corner upwards and pull the adhesive out along the battery’s left side. Doing it this way will reduce the risk of the adhesive tearing.
To make a Screwdriver, mix 2 parts orange juice with 1 part vodka. Stir together in a glass with ice. Garnish with an orange slice and cocktail cherry.
Final Words
You cannot open an iPhone 6 without a screwdriver.
It is possible to open an iPhone 6 without a screwdriver by using a thin piece of metal or a paperclip. Insert the metal or paperclip into the small hole on the bottom edge of the iPhone 6. Gently push and twist the metal or paperclip until the bottom plate pops off. Be careful not to lose the small screws that are attached to the plate.
