There are actually many types of screwdrivers that can be used for the Joy-Con controller. The most common type is the Phillips head screwdriver, but there are also flat head and Torx head screwdrivers that can be used. It really depends on the type of screws that are holding the Joy-Con together.
There is no definitive answer to this question as it depends on the particular type and model of Joy-Con that you have. However, we would recommend using a Phillips head screwdriver for most Joy-Con models.
What screwdriver do I need to open a Joy-Con?
Thank you for your question!
The Y2 0 and Y1 5 screwdrivers are the correct size for joycon triwing screws.
The screws needed for this project are M1 4 x 5mm.
How big is a Y00 screwdriver
This is a 15mm screwdriver tool that is made of metal. It is used to tighten or loosen screws.
He’s an opening pic and start prying along the seam at the bottom edge of the controller. Once you’ve pried up the bottom edge, you can start working your way around the controller, gently prying it apart. Be careful not to damage the ribbon cables inside.
What size screws for Joy-Con rail?
Be sure to use a JIS 000 screwdriver or an official iFixit PH 000 driver to remove the four 37 mm screws securing the right Joy Con rail to the frame of the device. Otherwise, you may strip the screws and damage the console.
Switch plate screws are generally 6-32 (thread diameter of #6 and 32 threads per inch). This is a standard size for many screws, so you should be able to find this size at most hardware stores.
What screwdriver do I need to open a Joy-Con Reddit?
You will need a special Y shaped screwdriver in order to open up and repair your Nintendo Switch Joy cons. This screwdriver can be purchased online or at most hardware stores.
When working with internal socket head type TORX screws, it is important to know the size of the screw in both inches and metric. The most common sizes are:
T4: 0.50″ 128mm
T5: 0.55″ 142mm
T6: 0.66″ 170mm
T7: 0.78″ 199mm
What can I use instead of a t10 screwdriver
There are a few different types of screwdrivers that can be used instead of a Torx screwdriver, depending on the size and style of the screw. Sometimes an allen key will work, or even a flat blade screwdriver if it will jam between opposite points in the recess. If the screw is very small, a jeweller’s screwdriver may be the only tool that will fit.
The 6mm (Y000) for iPhone is a product manufactured by Silverhill Tools. It includes 8 Tri-Wing (Y) sizes, up to Y5. The product dimensions are 6 x 4 x 04 inches, and the item model number is ABSTW1.
How do you remove Joy-Con lock?
To remove the case screws, use a small Phillips head screwdriver. Separate the halves of the Joy-Con by gently pulling them apart. To open the Joy-Con, press the release button on the back and then slide the top part of the Joy-Con up. Unscrew the charging rail using a small Phillips head screwdriver. To remove the back panel, slide a spudger or a plastic opening tool under the lower left corner of the back panel and pry it up. The buckle lock bracket can be removed by sliding a pair of pointed tweezers under the flat part in the middle of the bracket and prying it up.
If your Nintendo Switch’s Joy-Con are experiencing drift, you may be eligible for a free repair from Nintendo. Visit their customer service page for more information.
How do you remove a stuck Joy-Con
To remove your Joy-Cons, simply slide them upward from the Switch console. For the right Joy-Con, hold it upright with the + Button positioned upward, and for the left Joy-Con, hold it upright with the – Button positioned upward. Make sure to hold the Joy-Con strap in the other hand so it doesn’t get in the way.
As you can see, the Nintendo Switch uses tri-point screws instead of traditional screws. This is because tri-point screws are more secure and less likely to come loose over time. This is just one of the many reasons why the Nintendo Switch is such a great console.
What is the Joy-Con attachment called?
The Joy-Con grip accessory is a great way to combine both Joy-Con controllers into a traditional-style controller. Additionally, the Joy-Con charging grip is a great way to keep your controllers charged and ready to go.
In order to detach the Joy-Con straps, you will need to ensure that the slide lock at the bottom of the strap is in the “unlock” position. Once the lock is in the correct position, you can slide the strap from bottom to top, and it should come off easily. It is important to note that you do not need to press the release button on the back of the Joy-Con controller in order to detach the strap.
Final Words
There is no definitive answer, as the type of screwdriver you’ll need for your Joy-Con will vary depending on the make and model of your console. However, you can use a small Phillips-head screwdriver to remove the screws on the back of the Joy-Con.
There is no definitive answer to this question as it depends on personal preferences. Some people might prefer a smaller screwdriver for greater precision, while others might prefer a larger one for more torque. Ultimately, it is up to the individual to decide what size and type of screwdriver works best for them when disassembling their Joy-Con controllers.
