What is a podger spanner used for?

A podger spanner, also called a puddle-bar or puddle-rod, is a type of wrench used to loosen or tighten large bolts, nuts, or rivets. It consists of a long, sturdy bar with a handle at one end and a socket or jaws at the other. The socket or jaws are adjustable, so that they can be widened or narrowed to fit the bolt, nut, or rivet being worked on. Podger spanners are used in construction, shipbuilding, and other heavy industries.

A podger spanner is a type of wrench that is used to tighten or loosen nuts, bolts, or other fasteners. It is also sometimes used to help align holes that need to be drilled.

What is a podgers?

A drift is a small tool that is used to align rivet holes. It is inserted into the hole and then used to gently tap the hole until it is aligned.

A supertool ring podger spanner is a type of wrench that is used to turn or loosen nuts, bolts, and other fasteners. It is a handy tool to have in your toolbox, as it can be used for a variety of tasks. The supertool ring podger spanner comes in a variety of sizes, so you can choose the one that is best suited for your needs.

What origin is Podger

The Welsh name Podger is a patronymic surname created from the Welsh personal name Roger. The surname Podger was originally ap-Roger: the distinctive Welsh patronymic prefix “ap,” means “son of,” but the prefix has been assimilated into the surname over the course of time.

The word “poachers” sounds like it could be referring to people who illegally hunt and kill animals for their meat or fur. This is a serious problem in many parts of the world, and it’s important to be aware of the issue in order to help protect endangered animals.

How are spanners sizes?

A spanner is a type of wrench that is used to turn nuts and bolts. The size of a spanner is determined by the distance across the flats of the hexagonal nut or bolt that it would fit. A 17mm spanner, for example, would fit a nut that is 17mm across its flats. This is typically a nut that is used with a 10mm diameter bolt (M10).

There are various types of spanners available, each with their own specific use. The 1 x 15/16 inch spanner is used for nuts and bolts, the 7/16 x 13/16 inch spanner is used for pipes, the 3/4 x 11/6 inch spanner is used for valves, the 5/8 x 19/32 inch spanner is used for wrenches, and the 3/8 x 7/16 inch spanner is used for screws.

What size spanners are there?

There are different metric spanner sizes available, which are designed to fit various types of nuts and bolts. The most common sizes are: M10, M12, M14, and M16.

The place name Cheith is of Scottish Gaelic origin, from the word for “wood” or “battleground”. It is probably derived from a Brythonic/Pictish word meaning “forest”, from Proto-Brythonic *koɨd. Cheith may also be a habitational name, derived from a place so named in Moray, Scotland.

Where did the Wrights come from

The name Wright is derived from the Old English word ‘wryhta’, which originally referred to a woodworker or woodshaper. Over time, the term came to refer to any occupational worker. Wright can sometimes arise from the Anglicisation of the Scottish Gaelic name MacIntyre, which in English means ‘son of the wright’.

The surname Hawken comes from the Nordic given name Haakon, the name of seven Norwegian kings. The given name evolved to Hakon, and variations include: Håkon, Haakon, Horken, Hörken, Hawkin, Hawkins, and Hawken. Hawken is a possible variation of the English language surname “Hawkins”.

How do the British pronounce pencil?

The word “pencil” is pronounced with two syllables in the UK: “PEN” + “suhl”. The modern IPA transcription for this word is pɛ́nsəl, and the traditional IPA transcription is ˈpensəl.

The word ‘tiny’ is pronounced with two syllables in the UK – ‘TY’ and ‘nee’. The traditional IPA transcription for this word would be ‘ˈtaɪniː’. However, in modern IPA, the word is transcribed as ‘tɑ́jnɪj’.

How do the British pronounce tree

Tree is a noun that refers to a plant with a trunk, branches, and leaves.

Open-ended spanners are the most common type of spanner. They have jaws that are angled at about 15 degrees and are available in versions for hexagonal and square headed fasteners. The shafts on most models are slim or flat.

What are the two types of spanners?

There are many types of spanners, each designed for a specific purpose. Open-ended and double-ended spanners are the most common, and are used for general purpose tightening and loosening of nuts and bolts. Sockets and nut spinners are used for larger nuts and bolts, and are often ratcheted for speed and ease of use. Monkey wrenches are designed for particularly tight spaces, and come in both English and French models. Finally, pliers wrenches are designed for delicate work, and are often used in electronics.

Spanner wrenches are tools used to tighten or loosen nuts and bolts. There are many different types of spanner wrenches, each with a distinctly shaped hook. In addition, some spanners are multi-tools with double-sided hooks. The most common type of spanner wrench is the C spanner. Its head is open in the shape of the letter C, and its jaws are meant to correspond to the similarly sized nut.


A podger spanner is a type of wrench that is used to tighten or loosen nuts and bolts. It has a long, thin shaft that is designed to fit into narrow spaces. The shaft is also curved, which allows the user to reach around obstacles.

A podger spanner is a tool that is used to secure bolts and nuts. It is a type of wrench that is used to grip and turn a nut or bolt. The podger spanner is a versatile tool that can be used in a variety of situations.

Joe owns a small tool workshop in Utah. He inherited passion for construction from his father and aims to help others writing educational articles in his spare time. Every man should know how to fix basic things around the house!

Leave a Comment