How to put a new blade in a utility knife?

Objects that are often used in daily activities such as opening a package or box, are usually taken for granted. One such object is the utility knife. The utility knife is a handy tool that can be found in many kitchens, offices and workshops. Like any other tool, the utility knife needs to be maintained in order to function properly. Part of maintaining a utility knife is knowing how to change the blade. Here is a step-by-step guide on how to change the blade in a utility knife.

Utility knives are incredibly handy tools, but their utility is limited by the sharpness of their blades. When the blade on your utility knife gets dull, it’s time to replace it. Here’s how to do it:

1. Unscrew the utility knife’s handle to access the blade.

2. Remove the old blade from the handle.

3. Place the new blade into the handle.

4. Screw the handle back on to secure the blade.

5. You’re ready to resume using your utility knife!

How do you change a blade in a utility knife?

The release lever on the blade carrier Until it disengages with a knife and carefully Slide the blade out of the carrier. To avoid injury, keep your fingers clear of the blade as it is removed

To change the blade, carefully lift the old one out then slip the new one in place. There’s also a little locking tab that you’ll need to line up before you can push the blade all the way in.

How do you put a new blade in a box cutter

In order to remove the blade from a utility knife, you will need to first pop off the top. Once the top is off, the entire mechanism will be able to come out of the knife.

To remove a dull blade, first twist the knurled metal collar to loosen it. Then, carefully remove the blade. Be careful not to touch the sharp edge of the blade.

Are utility knife blades universal?

Utility knife blades are designed to be versatile and fit most standard utility knives. However, there may be some variations in shape, such as a hook-style blade, that might not be compatible with all knives. It’s always best to check the compatibility of the blade with your utility knife before making a purchase.


Push the blade in until you feel it lock. And then make sure it’s tight in there.

How do you put a blade in a Dewalt utility knife?

And hold the blade release button while inserting a new blade into the plate slot. Release the button to lock the blade in place.

To change the blade in your Craftsman 9-9486 utility knife, first remove the screw. Next, remove the top half of the knife. Finally, insert the new blade and screw the top half of the knife back on.

How do you change a single edge razor blade

put the blade in the razor so that the sharp edges are pointing in towards you and away from you. There are usually two notches on the underside of the razor that the blade sits in. make sure the blade is centered in the razor. Place the top part of the razor back on, pressing down until it snaps into place.

The blade cassette comes out and this holds four blades. So you won’t get caught out having to find more blades in the middle of a job.

How do you open anvil retractable utility knife?

To replace the blade in a utility knife, you have to push the plastic button near the tip and simultaneously pull out the blade (or push in the blade).

Super easy to use! Position selector over unlock Photo. This action will open a modal dialog. Press yellow button and slide blade fully into knife Photo. This action will open a modal dialog. Fully inserted Photo. This action will open a modal dialog. Fully extend locked blade out and close when done.

How do you change the blade on a Westcott exacto knife

To change the blade on the hobby knife, unscrew the textured grip from the base to make the blade loose. Once this is unscrewed, you should be able to change the blade out.

The Sieve of Eratosthenes is a simple, ancient algorithm for finding all prime numbers up to a specified integer. It works by iteratively mark off numbers as composite, starting with the first number as composite. The next number in the sequence is then checked to see if it is marked off as composite. If it is not, it is added to the list of prime numbers and all of its multiples are marked off as composite. This process continues until all numbers up to the specified integer are marked off.

How do you change the blade on an Olfa knife?

If your knife is starting to get dull, it’s time to replace the blade. Here’s how to do it:

1. Off grab a new blade place it on the lock.

2. And then slide it back into the handle of the knife.

That’s all there is to it! Your knife will be as good as new.

A utility knife is a versatile tool that can be used for a variety of tasks, from cutting through packaging to trimming materials. However, improper use of a utility knife can result in accidents. To use a utility knife safely and effectively, follow these tips:

-Instead of drawing the utility knife away from your body, draw it toward your body. This will give you more control over the blade and help prevent accidental cuts.

-Keep the utility knife blade sharp. A dull blade is more likely to slip and cause an accident.

-Don’t use the utility knife for tasks that are too difficult or beyond its capacity. Stick to cutting soft materials such as paper, cardboard, and plastic.

-When you’re finished using the utility knife, store the blade in the retracted position. This will prevent accidental cuts when the knife is not in use.


To put a new blade in a utility knife, remove the old blade by unscrewing the knife’s handle. Insert the new blade into the knife’s handle, lining up the blade’s teeth with the handle’s grooves. Screw the handle back on to secure the new blade in place.

Utility knives are a versatile tool that can be used for a variety of tasks. When the blade gets dull, it is easy to replace it with a new one. First, unscrew the cap at the end of the handle to expose the blade. Then, pull the old blade out and insert the new blade. Make sure the sharp edge is facing the right direction before screwing the cap back on. With a new blade in place, your utility knife will be ready to tackle any project.

Joe owns a small tool workshop in Utah. He inherited passion for construction from his father and aims to help others writing educational articles in his spare time. Every man should know how to fix basic things around the house!

Leave a Comment