You might like<\/strong>Where can i buy a sonic screwdriver?<\/span><\/div><\/a><\/div>If you’re going to be drilling into metal, it’s a good idea to use a lubricant like WD-40 Multi-Use Product. This will help reduce friction and make it easier to drill and cut into the metal.<\/p>\n
Conclusion <\/h2>\n
There are two ways to use the Harbor Freight Electric Drill Sharpener. The first way is to use the included jig. This jig holds the drill at the correct angle and prevents the drill from slipping during sharpening. Simply clamp the jig to the drill sharpener, insert the drill bit into the jig, and tighten the clamp. Then, while holding the drill steady, move the jig back and forth across the sharpening wheel to sharpen the bit.<\/p>\n
The second way to use the drill sharpener is without the jig. This method is faster, but it requires more skill and attention. First, clamp the drill sharpener to a work surface. Next, hold the drill bit with your fingers and position the tip of the bit against the wheel. Apply gentle pressure to the bit as you move it across the wheel to sharpen it. Be careful not to press too hard, or the bit will slip and you could injure yourself.<\/p>\n
To use a harbor freight electric drill sharpener, start by setting the drill bit in the chuck. Next, adjust the depth stop so that the cutting lips of the drill bit are just barely touching the grinding wheel. Then, turn on the grinder and slowly feed the drill bit into the wheel while keeping a steady pressure. Finally, hold the drill bit in the same spot for a few seconds to ensure a consistent edge.<\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":4796,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[4],"tags":[],"_links":{"self":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/posts\/827"}],"collection":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/comments?post=827"}],"version-history":[{"count":0,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/posts\/827\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/media\/4796"}],"wp:attachment":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/media?parent=827"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/categories?post=827"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/tags?post=827"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}