{"id":4602,"date":"2023-03-31T14:10:42","date_gmt":"2023-03-31T13:10:42","guid":{"rendered":"https:\/\/www.wrenchandscrewdriver.com\/?p=4602"},"modified":"2023-03-31T14:10:42","modified_gmt":"2023-03-31T13:10:42","slug":"what-size-spanner-for-washing-machine-feet","status":"publish","type":"post","link":"https:\/\/www.wrenchandscrewdriver.com\/what-size-spanner-for-washing-machine-feet\/","title":{"rendered":"What size spanner for washing machine feet?"},"content":{"rendered":"

If you’re wondering what size spanner you need for washing machine feet, wonder no more! In this helpful guide, we’ll tell you everything you need to know. Spanner sizes for washing machine feet can vary, depending on the make and model of your machine. However, a good rule of thumb is to use a spanner that is about the same size as the washing machine feet. This will ensure that you have enough room to work and that the spanner will be able to reach all the bolts.<\/p>\n

The size spanner you need for washing machine feet is a 10mm.<\/p>\n

What can I use instead of a spanner wrench for washer? <\/h2>\n

A metal clamp is a good option for this – the larger the better. A pair of pliers should also be able to do the trick, but I would try using a clamp first. Another option is a vise-grip.<\/p>\n

If your washing machine is not draining properly, the first thing you should check is the adjustment nut. The adjustment nut is located on the back of the washing machine, near the bottom. To adjust the nut, simply turn it clockwise to raise the washing machine.<\/p>\n

How do you remove a spanner nut without a spanner wrench <\/h3>\n
\"What
You might like<\/strong>What is the star screwdriver called?<\/span><\/div><\/a><\/div>

This is not the recommended way to loosen a spanner nut. This method may damage the pliers or the nut, and may not even work. It is better to use a wrench to loosen the nut.<\/p>\n

To remove the agitator, first remove the bolt and washer holding it in place. Then, lift the agitator off of the drive shaft.<\/p>\n

How do I know what size spanner wrench to get? <\/h2>\n

Spanner wrenches come in various sizes from 4 inches to 18 inches in length. To determine what size spanner wrench you have, measure from the end of the handle to the edge of the fixed side of the vise. Some spanner wrenches have the size printed on the handle.<\/p>\n

If you don’t have a wrench on hand, don’t worry – your household items can make for a suitable replacement. Per the Fantastic Handyman blog, “Take two large coins and place them on either side of the nut. Grip the coins between the knuckles of your index and middle fingers for extra grip and twist in the direction needed to loosen the nut.”<\/p>\n

How do you adjust the leg level on a washing machine? <\/h2>\n
You might like<\/strong>What is the purpose of try square?<\/span><\/div><\/a><\/div>

If your washer isn’t level, it can vibrate and make noise. To fix this, you’ll need to adjust the washer feet. With the pliers or by hand, turn the front leveling feet counterclockwise to lower the washer feet or clockwise to raise the washer feet. The feet may need to be at different levels to adapt to the floor. Make sure that each foot remains securely attached to the base of the washer.<\/p>\n

Place the level on the top right hand side of the washer. Put on a pair of gloves. And use the level to make sure the washer is level from front to back and side to side.<\/p>\n

How do you adjust appliance feet <\/h3>\n

If you turn the leveling screw clockwise, it will lower the leveling foot. This will make the machine more stable and level on uneven surfaces.<\/p>\n

The hub nut is a important part of your washing machine. It is designed to hold the inner tub on to the transmission. If your hub nut is stripped or damaged, it may need to be replaced. This hub nut is approximately 15 inches in diameter.