You might like<\/strong>Where to buy torx screwdriver?<\/span><\/div><\/a><\/div>To remove the punch from a Brother sewing machine, first place the punch on a firm surface. The side facing you should have the gray arrows. Hold down the punch arm and move the gray piece to the left to unlock it.<\/p>\n
How do you empty a 3 hole punch <\/h3>\n
You can easily empty the hole punch bin by following these simple steps:<\/p>\n
1. Open the Hole Punch Unit cover.
\n2. Pull out the hole punch dust bin.
\n3. Dispose of the paper punching.
\n4. Push back in the hole punch dust bin.
\n5. Close the Hole Punch Unit cover.<\/p>\n
The most common standard for hole punching in the US is the three-hole standard, which is widely used for US letter paper size (8+1\/2 by 11 inches, 220 by 280 mm). The holes are positioned symmetrically, with the centers 4+1\/4 inches (108 mm) apart.<\/p>\n
Warp Up <\/h2>\n
Using a pair of needle-nose pliers, bend the tip of the wire into a small loop. Then, holding theloop of wire between the thumb and first finger of your non-dominant hand, use the jaws of thepunch pliers to grip the wire just below the loop. Next, use your dominant hand to twist the handleof the punch pliers clockwise, causing the jaws to revolve around the wire and create a loop. Stoptwisting when the loop is about the same size as the one you created at the start. Finally, release thejaws of the punch pliers and gently pull the loop of wire out.<\/p>\n
If you need to make a small, precise hole in metal, you can do so using revolving punch pliers. First, select the size of punch you need based on the thickness of the metal. Next, position the punch over the area where you need the hole, making sure it is lined up straight. Then, squeeze the handles of the punch pliers together to make the punch go through the metal. Finally, release the handles and remove the punch from the metal.<\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":5001,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[9],"tags":[],"_links":{"self":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/posts\/2135"}],"collection":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/comments?post=2135"}],"version-history":[{"count":0,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/posts\/2135\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/media\/5001"}],"wp:attachment":[{"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/media?parent=2135"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/categories?post=2135"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.wrenchandscrewdriver.com\/wp-json\/wp\/v2\/tags?post=2135"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}